Singapore Gunpla Society

Please remember to introduce yourself to everyone before heading off into the other sections.
This is just pure courtesy.

From your ~Admins~
Singapore Gunpla Society

Gundam modelling society located in Singapore for everyone around the world

Dear all, this forum will be shut down in June 2017 due to low activity.

    Guide Needed.. Paint (w/o airbrush)


    SGGS Lurker
    SGGS Lurker

    Posts : 1
    Join date : 2014-05-06

    Guide Needed.. Paint (w/o airbrush)

    Post by cheeyuang on Tue 06 May 2014, 2:38 pm

    Hi, i am newbie here. I juz know to build the model, and drawing panel line using marker, paint wise.. i am 0 knowledge..  Embarassed 
    Can anybody simply tell me how was the step doing painting? and what paint am i using to do so?
    I owned a MG Gundam Red Astray & Full Cloth Crossbone, not dare to paint coz scare spoil the model..
    So i am thinking to get a HG Sengoku Astray to try before i do for my MG.. Anybody can give me some solution for the step to paint?(w/o airbrush)
    Is that possible to paint like photo(Glossy) below if w/o airbrush?

    SGGS Newbie
    SGGS Newbie

    Posts : 53
    Join date : 2012-11-03

    Re: Guide Needed.. Paint (w/o airbrush)

    Post by brit363 on Tue 06 May 2014, 4:07 pm

    Maybe you want to take a look at this post....

    there are different ways to paint your kit depending on your choice..... you want glossy.... you just have to spray it with a glossy top coat... the rest can be hand brushed beforehand...

    SGGS Lurker
    SGGS Lurker

    Posts : 8
    Join date : 2013-12-13

    Re: Guide Needed.. Paint (w/o airbrush)

    Post by jazy92 on Thu 08 May 2014, 8:35 pm

    it's possible in the case of the red frame shown. for the white, you can try using tamiya aluminium spray can.

    for the red can consider using gloss black > taimiya chrome silver > tamiya clear red.

    Sponsored content

    Re: Guide Needed.. Paint (w/o airbrush)

    Post by Sponsored content

      Current date/time is Fri 26 May 2017, 2:16 am